

Products

Capsule Section - Capsule Machines

CAPSULE : Vibro Sifter

Vibro Sifter

GENERAL SPECIFICATIONS

Vibro separators are circular unitary gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle size, having a very wide range applications.
This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off centered weights at the top and bottom end of the motor shaft.

The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight acts to tilt the machinery which causes vibration in the vertical tangential axis.
The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern. Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening. “GEBERIX” Vibro sifter are available with a wide range of possible screen sizes (mesh) Option for multiple deck separation is also possible.

The unit consist of Specially designed vibratory motor to run on 400/440V, suitable HP, 3 phase, 50 cycles electric supply ,with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the center of the base plate of screening unit. Screening unit consists of SS 304 screen sandwiched between SS 304 hopper and bowl with the help of special clamp with gasket. This in turn is clamped to the base plate. Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict the vibration from being transferred to the floor.

SALIENT FEATURES:

Noiseless, Maintenance free & high speeds.

Available in various models providing screening diameter of 12”, 20”, 30” , 36”, 48”, 72” etc

Portable and compact.

Electric power requirement less than other machine of the kind in the industries & lower energy 5)consumption compared to reciprocating vibratory system.

Standard machine are with TEFC motor explosion proof / flame proof motor material.

All contact parts and screen of SS 304 AISI stainless steel material.

SS 316 quality contact parts optional.

Special requirement like brushing arrangements, SS lid with charging port and spring loaded outlets.

Easy dismantling and cleaning facility for contact parts.

Wide range of screen sizes 4-300 Mesh.

Double & Triple deck screens with outlet and hopper for bottom deck available on request.

TECHNICAL SPECIFICATIONS

Model	20”	30”	48”
Screens	SS 304	SS 304	SS 304
Screen Dia.	508 mm.	762 mm.	1200 mm.
Capacity/Hour *	20 to 140 Kgs.	30 to 200 Kgs.	200 to 400 Kgs.
Charging height	1110 mm.	1250 mm.	1340 mm.
Discharging height	690 mm.	790 mm.	850 mm.
Electric Motor	0.25 HP special vibratory motor	0.5 H.P. special vibratory motor	1.5 HP special vibratory motor
Net weight (Approx.)	150 Kgs.	200 Kgs.	350 Kgs.
Gross weight (Approx.)	200 Kgs.	260 Kgs.	420 Kgs.
Machine Dimension (in mm)	700mm x 700 mm x 1000 mm	900mm x 900 mm x 1250 mm	1350mm x 1350 mm x 1350 mm
Case Dimensions (in mm)	900 mm x 900 mm x 1300 mm	1000 mm x 1000 mm x 1400 mm	1450 mm x 1450 mm x 1500 mm

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.

CAPSULE : Double Cone Blender

OPERATION: DOUBLE CONE BLENDER : Capacity : 10 kg., 25 kgs., 50 kgs., 100 kgs., 200 kgs., 300 kgs., 500 kgs. OPERATION : The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. SALIENT FEATURES:
	The conical shape of both ends enables uniform mixing and easy discharge.
	All contact parts are made out of SS304 quality material.
	Maximum care has been taken to ensure safe operation of the unit.
	Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )
	Two nos. of safety road will be provided at back side. ( One LH side & one RH side )
	Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with open able cover provided at other end of the cone for material charging & cleaning.
	One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
	Cone will be mirror polished from the inside & outside & structure will be matt polished.

	All moving parts covered with SS304 covers.
	Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
	Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
	As per customer requirement machine will be provided with left side drive or with right side drive.
	The conical shape at both ends enables uniform mixing and easy discharge.
	All contact parts are made out of SS304/316(as per customer requirement) quality material.
	Maximum care has been taken to ensure safe operation of the unit.
	Worm reduction gear use for speed reduction.
	Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
	Inside & outside of the cone will be polished to the mirror finished.
	General structure made out of SS304 and Polished to the matt / mirror finish (as required by you) in GMP Model.
	All safety guards & covers made out of SS304 in GMP Model.
	Hand wheel will be provided for manual tilting of cone.
	Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

TECHNICAL SPECIFICATIONS

Capacity / Kg	10	25	50	100	150	200	250	300
Gross Vol	35	80	150	300	450	600	800	900
Volume/Ltrs	10	50	100	200	300	400	500	600
Motor Hp	0.5	1	2	3	5	5	7.5	7.5
Gear Box	1.75”	1.75”	2”	3”	4”	4”	5”	5”
Butterfly Valve	NA	NA	NA	200	200	250	250	250
Safety Guard	NA	NA	YES	YES	Yes	YES	YES	YES
Discharge Ht	300	300	450	450	450	450	450	450

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.

CAPSULE : Filling machine

Filling machine

MODELS :

GEB-300SS / GEB- 300 STD- 300 Hole M/C.
GEB-200 SS / GEB-200 STD – 200 Hole M/C.

The SS- stainless steel model, body.
Is fabricated made out of AISI304Q. Material. The STD-standard model, body is fabricated made out of mild steel duly hard chrome plated body.

OUT PUT :

8000 capsule per/ hour for capsules size 00to 5 for 300 hole M/C.
4250 capsule per /hour for capsule size 00 to 5 for 200 Hole M/C.
Depending on formulation and operator skill.

INTERCHANGEABILITY :

The machine is manufactured to suit the following capsule size combination 00/0/1/2/3/4 or 5.

UNIQUE FEATURES :

Simple to operate, can be handled by unskilled labor.
All the loading plates are made out of ALSL 304 Q. material.

TECHNICAL SPECIFICATIONS

	300 – Holes	200 – Holes
Length	405mm	365mm
Width	300mm	270mm
Height	455mm	380mm
Weight	40.00 kg	26.00kg

Note: Dimensions & Technical Details are subject to change as per customers' requirement without any further notice.

All of the above also Available in Semi Automatic Models

© Copyright 2005. Geberix Consultants & Engineers India. All rights reserved.